PAGE 1
PAGE 2
Spec# Table of Contents 1 2 3 4 5 ............ EWC-1 69910 E EZSTL8LC GRY ADA BILVL WTR COOLER 4425 D P9704BG 11/2 PVC P TRAP W ADPTL 330881 BC OCR19X-C 1/2COMPX3/8COMP CP ANG STP LEAD FREE 4639 O 34312 20 PEX LAV SPLY 6 ............ EWC-2 7 268885 ELKAY VRCTL8SC BI-LVL WATER COOLER 8 9 10 4425 D P9704BG 11/2 PVC P TRAP W ADPTL 330881 BC OCR19X-C 1/2COMPX3/8COMP CP ANG STP LEAD FREE 4639 O 34312 20 PEX LAV SPLY 11 ............ EWH-1 12 143551 EEMAX EMT-4 110V 1.2KW 1PH 13 ............
PAGE 3
Spec# Table of Contents 23 225683 H 40-SWHP-W 211/4X211/4 20GAL WM / CEIL MNT WTR HEATER PLATFORM 24 ............ FD-1 25 85124 ZURN ZN-415-P-6B-3NL DRAIN 26 ............ FS-1 27 124198 ZURN Z1900-4NL FULL GRATE 28 ............ GT-1 29 333064 ZURN Z1173-RD-800 GREASE TRAP 30 ............ HB-1 31 279073 WOODFORD MB24-3/4" WALL HYDRANT 32 ............ HD-1 33 101930 ZURN ZN-415-P-5I 3"NL 34 ............
PAGE 4
Spec# Table of Contents 44 291939 MAINLINE ML102EZ WHT LAV-GUARD TRAP & SUPPLY COVER F/ TUBULAR P-TRAP 2-ANGLE STOP & 2-SUPPLY ADA APPROVED 45 ............ U-1 46 243286 KOH K-4904-ET-0 WHT .125GPF 3/4 TOP SPUD WASHOUT BARDON URINAL 47 280650 SLOAN 3912633 186-.13YB FLUSH VALVE 48 42338 S 0310083 J212A 11/2X5 YK PIPE SPRT 49 ............ WC-1 50 237569 KOH K-4325-0 WHT EL 1.28GPF/ 1.6GPF WH 11/2 TOP SPUD ADA COM KNGSTN BOWL 51 225303 SLOAN 3910168 111-1.
PAGE 5
Spec# Table of Contents 65 357248 BRADLEY MF2944-NSD-IR-LONDON WASH FOUNTAIN 66 ............ SP-1 67 324562 ZOELLER 940-0014 OIL SMART SYSTEM 68 ............ MS-1 69 26971 ZUR Z1996-24 24X24X10 MOP SRV BASIN 70 141376 ZA Z843M1-RC SRV SINK FCT NOT FOR POTABLE WATER USE 71 197960 ZUR JP1996-HH HOSE & BRKT ONLY 72 178097 ZUR JP1996-MH MOP HGR ONLY 73 ............ MV-1 74 350320 LEONARD 170-LF-BP 3/8" TMV ASSE-1070 75 ............
PAGE 6
Spec# 86 87 88 89 90 91 92 93 Table of Contents 198713 MCG 151AECO CP SS SHELL ECO-LINE BSKT STR L TP 4425 D P9704BG 11/2 PVC P TRAP W ADPTL 330881 BC OCR19X-C 1/2COMPX3/8COMP CP ANG STP LEAD FREE 4342 BC 1-20A C 3/8ODX20CP LAV RISER LEAD FREE ............ FCO 27857 ZUR ZN1400 4NL NCL BRNZ CVR CO ............
PAGE 7
Spec Seq#: 1 EWC-1
PAGE 8
Spec Seq#: 2 Two Station Wall Mount Water Coolers Barrier-Free Access (Adult and Child) NSF/ANSI 61 Compliant – Models EZTL8C, EZSTL8C, EZTLDDC and EZSTLDDC ® SPECIFICATIONS ® ADA COMPLIANT These Water Coolers comply with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Unit is compliant if installed in an alcove and is also compliant when mounted on an exposed wall if a wing wall is located on the left side or if LKAPREZL apron is installed under upper unit.
PAGE 9
Spec Seq#: 2 Two Station Wall Mount Water Coolers Barrier-Free Access (Adult and Child) NSF/ANSI 61 Compliant – Models EZTL8C, EZSTL8C, EZTLDDC and EZSTLDDC ® ROUGH-IN DIMENSIONS (NOT FURNISHED) SERVICE STOP DIRECTION NOTE: WATERFLOW TO COOLER WATER INLET 1/4" O.D. TUBE 3/8" O.D. TUBE CONNECT COLD WATER BUILDING WATER INLET SUPPLY SUPPLY INLET COLD WATER BUILDING WATER CONNECT 3/8" O.D. TUBE 1/4" O.D.
PAGE 10
PLASTIC TUBULAR 1-½” P-TRAP WITH THREADED ADAPTER Engineering Specification: Dearborn Brass Plastic Tubular 1-½” P-Traps with Threaded Adapter are designed for use in tubular drain applications. Options include PVC or ABS plastic adapter and True Blue Premium Washers for superior sealing. Available in white or black polypropylene plastic.
PAGE 11
Spec Seq#: 4 Engineer / Architect Job Location Wholesaler Submittal Date Contractor OCR1B/ OCR3B & OCR09/ OCR19/ OCR39/ OCR49 Multi-Turn Angle Stop – Compression x Compression Use: For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115°F. For those applications, use our KTTM series ball stops.
PAGE 12
Spec Seq#: 4 OCR39 R1 OCR39Z C OCR49 C OCR49 R OCR49Z C 1/2” nom compression x 1/2” OD compression, rough brass, window box 1/2” nom compression x 1/2” OD compression, brass stem, chrome plated 1/2” nom compression x 5/8” OD compression, chrome plated 1/2” nom compression x 5/8” OD compression, rough brass 1/2” nom compression x 5/8” OD compression, brass stem, chrome plated No-Lead Part Listing: OCR09X C 1/2” nom compression x 1/4” OD compression, chrome plated OCR09X C1 1/2” nom compression x 1/4” OD c
PAGE 13
Spec Seq#: 4 A OCR19L1 less outlet nut OCR19PX & OCR19PXX PEX tube Insert OCR19L4 less inlet nut PART DIMENSIONS (Inches) DIM A DIM B Model OCR1B 1.02 2.75 OCR3B 1.11 2.75 OCR09 1.02 2.75 OCR19 1.02 2.75 OCR19K 1.02 2.75 OCR19L1 0.74 2.75 OCR19L4 1.02 2.41 OCR19P 1.02 2.41 OCR19PX 1.02 2.41 OCR29 1.18 2.85 OCR39 1.11 2.85 OCR49 1.18 2.97 B Listings & Certifications: IAPMO listed to ASME A112.18.1 / CSA B125.1 (File # 0645) CSA listed to ASME A112.18.1 / CSA B125.
PAGE 14
Spec Seq#: 5 PEX WATER SUPPLY TUBES PRODUCT NUMBER 34351 34300 34301 34302 34305 34306 34310 34311 34312 34313 34322 34314 34315 34316 34317 34015 34018 4639 TECHNICAL SPECIFICATION: Oatey’s Pex Water Supply Tubes are used in residential and commercial plumbing applications. Used for dishwasher supply, sink supply, and toiled Risers. Meets performance requirements of ASME A122.18.
PAGE 15
Spec Seq#: 6 EWC-2
PAGE 16
Two Station Wall Mount Water Cooler Vandal-Resistant, Barrier-Free Access Model VRCTL8SC ® SP E C I F I C AT I O N S GENERAL Self-contained, double wall hung electric refrigerated, water cooler. Vandal-resistant unit for use in high demand locations where vandalism may occur. Rated for indoor or outdoor use. Stainless steel construction provides vandal-resistant enclosure. Optional perforated stainless steel louver screening prevents objects from being inserted into cooler.
PAGE 17
Two Station Wall Mount Water Cooler Vandal-Resistant, Barrier-Free Access Model VRCTL8SC ® ROUGH- IN DIM ENSIONS ® 1/4" O.D. TUBE WATER INLET TO COOLER NOTE: WATERFLOW DIRECTION A B INSTALLER PLEASE NOTE: IMPORTANT THIS WATER COOLER HAS BEEN DESIGNED AND BUILT TO PROVIDE WATER TO THE USER WHICH HAS NOT BEEN ALTERED BY MATERIALS IN THE COOLER WATERWAYS. THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS A COMMON PROCEDURE.
PAGE 18
PLASTIC TUBULAR 1-½” P-TRAP WITH THREADED ADAPTER Engineering Specification: Dearborn Brass Plastic Tubular 1-½” P-Traps with Threaded Adapter are designed for use in tubular drain applications. Options include PVC or ABS plastic adapter and True Blue Premium Washers for superior sealing. Available in white or black polypropylene plastic.
PAGE 19
Spec Seq#: 9 Engineer / Architect Job Location Wholesaler Submittal Date Contractor OCR1B/ OCR3B & OCR09/ OCR19/ OCR39/ OCR49 Multi-Turn Angle Stop – Compression x Compression Use: For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115°F. For those applications, use our KTTM series ball stops.
PAGE 20
Spec Seq#: 9 OCR39 R1 OCR39Z C OCR49 C OCR49 R OCR49Z C 1/2” nom compression x 1/2” OD compression, rough brass, window box 1/2” nom compression x 1/2” OD compression, brass stem, chrome plated 1/2” nom compression x 5/8” OD compression, chrome plated 1/2” nom compression x 5/8” OD compression, rough brass 1/2” nom compression x 5/8” OD compression, brass stem, chrome plated No-Lead Part Listing: OCR09X C 1/2” nom compression x 1/4” OD compression, chrome plated OCR09X C1 1/2” nom compression x 1/4” OD c
PAGE 21
Spec Seq#: 9 A OCR19L1 less outlet nut OCR19PX & OCR19PXX PEX tube Insert OCR19L4 less inlet nut PART DIMENSIONS (Inches) DIM A DIM B Model OCR1B 1.02 2.75 OCR3B 1.11 2.75 OCR09 1.02 2.75 OCR19 1.02 2.75 OCR19K 1.02 2.75 OCR19L1 0.74 2.75 OCR19L4 1.02 2.41 OCR19P 1.02 2.41 OCR19PX 1.02 2.41 OCR29 1.18 2.85 OCR39 1.11 2.85 OCR49 1.18 2.97 B Listings & Certifications: IAPMO listed to ASME A112.18.1 / CSA B125.1 (File # 0645) CSA listed to ASME A112.18.1 / CSA B125.
PAGE 22
Spec Seq#: 10 PEX WATER SUPPLY TUBES PRODUCT NUMBER 34351 34300 34301 34302 34305 34306 34310 34311 34312 34313 34322 34314 34315 34316 34317 34015 34018 4639 TECHNICAL SPECIFICATION: Oatey’s Pex Water Supply Tubes are used in residential and commercial plumbing applications. Used for dishwasher supply, sink supply, and toiled Risers. Meets performance requirements of ASME A122.18.
PAGE 23
Spec Seq#: 11 EWH-1
PAGE 24
Spec Seq#: 12 S P E C I F I C AT I O N S electric mini tank water heater 1, 2.
PAGE 25
Spec Seq#: 13 EWH-2
PAGE 26
Spec Seq#: 14 Commercial Electric Water Heaters ® 133603 TM Designed for use as a recovery heater having its own storage tank. Available in upright standard models (DEN) and lowboy models (DEL). GLASSLINED TANK - Thirteen sizes; 6 thru 119 gallon capacity. Tank interior is coated with glass specially designed by A. O. Smith for water heater use. ELEMENTS - Zinc plated copper sheaths for longer life.
PAGE 27
Spec Seq#: 14 Commercial Electric Water Heaters ® TM 133603 PRODUCT SPECIFICATIONS ROUGH-IN DIMENSIONS Models Dimensions DEL-6 DEL-10 DEL-15 DEL-20 DEL-30 DEL-40 DEL-50 DEN-30 DEN-40 DEN-52 DEN-66 DEN-80 DEN-120 No. of Elements 1 1 1 1 2 2 2 2 2 2 2 2 2 Tank Capacity US Gals.
PAGE 28
Spec Seq#: 15 Submital Data PH & WHV Series Job Name: Location: Schedule #: Model #: Engineer: Contractor: Representative: Description Materials of Construction The PH Series...eliminates the problem of nuisance cycling of the safety relief valve when a backflow preventer or check valve is present in a domestic hot water system. Utilizing Flexcon’s patented double diaphragm system, they provide a reservoir for expanded water volume and help to prevent dangerous over pressurization.
PAGE 29
Spec Seq#: 16 PRODUCT SPECIFICATION DRAWING QUICK STAND™ #50-SWHP-WM Wall Mounted Equipment Platform WATER HEATER 224345 WALL STRUCTURE PAN ASSY 26.50 (Inside Wall) ALL DIMENSIONS IN INCHES The Wall Mounted Equipment Platform is engineered to support water heaters up to 50 U.S. gallons (or other equipment up to 600 pounds total weight) mounted to a wall. This item also serves as a drain pan.
PAGE 30
Spec Seq#: 17 EWH-3
PAGE 31
Spec Seq#: 18 Commercial Electric Water Heaters GOLD SERIES COMMERCIAL ELECTRIC WATER HEATERS Designed for use as a recovery heater having its own storage tank. Note: Not recommended for sanitizing water applications. MODELS DRE-52, 80, 120 FEATURES Meets the standby loss requirements of the U. S. Department of Energy and current edition of AHRAE/IESNA 90.1. 318792 ® GOLD ELEMENTS - DRE models ship with the Goldenrod 24K gold plated elements (see element availability chart on back).
PAGE 32
Spec Seq#: 18 Commercial Electric Water Heaters ® Standard kW Input BTU/ Hour 3O°F 17°C 40°F 5O°F 60°F 70°F 8O°F 9O°F 100°F 110°F 120°F 130°F 140°F 22°C 28°C 33°C 39°C 45°C 50°C 56°C 61°C 67°C 72°C 78°C 6 20,478 9 30,717 12 40,956 13.5 46,075 15 51,195 18 61,434 24 81,912 27 92,151 30 102,390 36 122,868 40.
PAGE 33
Spec Seq#: 19 Submital Data PH & WHV Series Job Name: Location: Schedule #: Model #: Engineer: Contractor: Representative: Description Materials of Construction The PH Series...eliminates the problem of nuisance cycling of the safety relief valve when a backflow preventer or check valve is present in a domestic hot water system. Utilizing Flexcon’s patented double diaphragm system, they provide a reservoir for expanded water volume and help to prevent dangerous over pressurization.
PAGE 34
Spec Seq#: 20 EWH-4 & EWH-5
PAGE 35
Spec Seq#: 21 Commercial Electric Water Heaters ® 128801 TM Designed for use as a recovery heater having its own storage tank. Available in upright standard models (DEN) and lowboy models (DEL). GLASSLINED TANK - Thirteen sizes; 6 thru 119 gallon capacity. Tank interior is coated with glass specially designed by A. O. Smith for water heater use. ELEMENTS - Zinc plated copper sheaths for longer life.
PAGE 36
Spec Seq#: 21 Commercial Electric Water Heaters ® TM 128801 PRODUCT SPECIFICATIONS ROUGH-IN DIMENSIONS Models Dimensions DEL-6 DEL-10 DEL-15 DEL-20 DEL-30 DEL-40 DEL-50 DEN-30 DEN-40 DEN-52 DEN-66 DEN-80 DEN-120 No. of Elements 1 1 1 1 2 2 2 2 2 2 2 2 2 Tank Capacity US Gals.
PAGE 37
Spec Seq#: 22 Submital Data PH & WHV Series Job Name: Location: Schedule #: Model #: Engineer: Contractor: Representative: Description Materials of Construction The PH Series...eliminates the problem of nuisance cycling of the safety relief valve when a backflow preventer or check valve is present in a domestic hot water system. Utilizing Flexcon’s patented double diaphragm system, they provide a reservoir for expanded water volume and help to prevent dangerous over pressurization.
PAGE 38
Spec Seq#: 23 PRODUCT SPECIFICATION DRAWING QUICK STAND™ #40-SWHP-WM Wall Mounted Equipment Platform WATER HEATER WALL STRUCTURE 225683 DRAIN KIT Scale: 1 / 4 21.34 (Inside Wall) PAN ASSY Scale: 1 / 14 ALL DIMENSIONS IN INCHES FULLY ASSEMBLED Scale: 1 / 14 The Wall Mounted Equipment Platform is engineered to support water heaters up to 20 U.S. gallons (or other equipment up to 375 pounds total weight) mounted to a wall. This item also serves as a drain pan.
PAGE 39
Spec Seq#: 24 FD-1
PAGE 40
Spec Seq#: 25 Z415B ® SPECIFICATION SHEET BODY ASSEMBLY W/ "TYPE B" STRAINER TAG _______ 85124 Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Dimensions In Inches Approx. Strainer Wt. Lbs. Open Area K K' B Strainer [kg] Sq. In. [cm2] Dia. Min. Max. Min. Max.
PAGE 41
Spec Seq#: 26 FS-1
PAGE 42
Spec Seq#: 27 SPECIFICATION SHEET Z1900 ® 12 x 12 [305 x 305] A.R.E. SANI-FLOR RECEPTOR 6 [152] SUMP DEPTH TAG ______ 124198 Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Grate Approx A- Pipe Size In. Wt. Lbs. Open Area [kg] Sq. In.
PAGE 43
Spec Seq#: 28 GT-1
PAGE 44
Spec Seq#: 29 Z1173-RD SPECIFICATION SHEET GREASE INTERCEPTOR WITH RIGID PIPE DRAW-OFF, ACCUMULATING CONE, ® AND IN LINE SHUTOFF VALVE TAG ______ 333064 Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Size Capacity Approx. Inlet/ Flow Rate Water Grease Wt. Lbs. Outlet G.P.M. Size** [L] Gal. [L] Lbs.
PAGE 45
Spec Seq#: 30 HB-1
PAGE 46
The Model MB24 & MB26 Modular Box systems are designed to securely contain a Woodford Model 24 or 26 wall faucet in mild climate area commercial buildings. The MB24 includes a light weight, high impact, composite box that is stubbed out of a frame or masonry wall. After the wall is finished, a heavy 14 gauge stainless steel door and fascia assembly is screwed into the box to create a durable, secure access and an attractive front.
PAGE 47
1 2 3 4 5 MODEL MB24 & MB26 PARTS LIST ITEM 1 2 2A 2B 3 4 5 6 7 8 9 10 11 PART# 30121 30120 50009 30106 30109 30247 30105 30104 30008 30009 30151 34HF-CH 50HF-CH RK-24 DESCRIPTION Handle Screw - Nickel Wheel Handle - Clear Tee Key Wheel Handle - Metal Packing Nut - chrome EPDM Packing Packing Support Washer Operating Stem Washer Washer Screw Fascia Screws (2) 34HF Vacuum Breaker for Model 24 50HF Backflow Preventer for Model 26 Chrome Repair Kit (Includes items 1-8) 6 2A 7 8 2B 9 10 11 3 1/8" 3 1/8
PAGE 48
Spec Seq#: 32 HD-1
PAGE 49
Spec Seq#: 33 Z415I SPECIFICATION SHEET BODY ASSEMBLY W/ "TYPE I" STRAINER ® TAG ________ 101930 Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Dimensions In Inches A - Pipe Size B Strainer Dia. K C 2-3 [51-76] 5-7/16 [138] 7/8 [22] 2-3-4 [51-76-102] 7-3/8 [187] 1 [25] 3-4 [76-102] 9 [229] 1/2 [13] 6 [152] 9 [229] 1/2 [13] Min. K' Max. 1-9/16 [40] 2-5/8 [67] 2-9/16 [65] 3-3/8 [86] 2-3/16 [56] 3-1/8 [79] 2-3/16 [56] 3-1/8 [79] Min. Max.
PAGE 50
Spec Seq#: 34 IMB-1
PAGE 51
Spec Seq#: 35 ⅜" Compression Outlet Connection outlet box Ox Box™ Item # Submitted ����������������������������������� Job Name ����������������������������������������� Location ������������������������������������������ Engineer ������������������������������������������ SPECIFICATION Sioux Chief 696 series Ox Box ⅜" compression outlet connection outlet box shall be used where necessary in plumbing supply systems. Box shall allow for mounting with supply lines from top or bottom, mounted on-stud.
PAGE 52
Spec Seq#: 36 L-1 & L-2
PAGE 53
Spec Seq#: 37 KINGSTONTM Features • K-2005 ALSO K-2006, K-2007 ADA CSA B651 OBC 21487 • • • • • • • WALL-MOUNT LAVATORY Vitreous china Wall-mount With hanger With overflow Drilled for concealed arm carrier Optional soap dispenser hole on left (-L) or right (-R) 8″ (203 mm) centers, 4″ (102 mm), centers or single hole 21-1/4″ (540 mm) x 18-1/8″ (460 mm) Codes/Standards Applicable Specified model meets or exceeds the following: • • • • • ADA ICC/ANSI A117.1 CSA B651 OBC ASME A112.19.2/CSA B45.
PAGE 54
Spec Seq#: 37 KINGSTONTM Technical Information Installation Notes Install this product according to the installation guide. Holes Spout K-2005 Ø 1-1/4″ (32 mm) Faucet Ø 1-1/4″ (32 mm) Soap Ø 1-1/4″ dispenser (32 mm) K-2006 Ø 1-3/8″ (35 mm) Ø 1-3/8″ (35 mm) Will comply with OBC when installed per Clause 3.8.3.11.
PAGE 55
Spec Seq#: 38 SPECIFICATION: (example) • HEAVY-DUTY CAST BRASS single hole mount faucet • Polished chrome plated finish • Vandal Resistant Brass Handle activator • Delta® metering slow close cartridge • Two Body mounted stainless steel Anti-Rotation locking pins • Vandal resistant spout outlet • Total flow not to exceed 0.
PAGE 56
Spec Seq#: 38 Metering Handwash Faucet Approvals: • CSA certified 87T104 - 87T111 - LOCKING PINS • Complies to ASME A112.18.1 • Lever Handle ADA Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. 157731 • IAPMO listed (Contact Delta Representative for State and/or Local Approvals.) 87T111 FLOWRATE vs PRESSURE 87T151 86T1104 108mm (4.25”) 89mm (3.5”) 51mm (2.0”) 25mm (1.0”) 56mm (2.2”) 29mm (1.13”) MAX. DECK THICKNESS 41mm (1.
PAGE 57
Spec Seq#: 39 ML760 GRID DRAIN SPECIFICATIONS 19-HOLE COMMERCIAL GRID DRAIN 237478 • 1-1/4” Forged Brass Construction • 6” 17 GA Tailpiece • Chrome Plated ML760 Cross Reference 760-1 D70-100 No. 5680PC FY-155 1 Grid Body Brass 155A Z8743-PC 2 Washer Brass CERTIFICATIONS 3 Friction Washer Paper • cUPC 4 Locknut Zinc 5 Tailpiece Brass www.mainlinecollection.
PAGE 58
PLASTIC TUBULAR 1-½” P-TRAP WITH THREADED ADAPTER Engineering Specification: Dearborn Brass Plastic Tubular 1-½” P-Traps with Threaded Adapter are designed for use in tubular drain applications. Options include PVC or ABS plastic adapter and True Blue Premium Washers for superior sealing. Available in white or black polypropylene plastic.
PAGE 59
Spec Seq#: 41 Engineer / Architect Job Location Wholesaler Submittal Date Contractor OCR1B/ OCR3B & OCR09/ OCR19/ OCR39/ OCR49 Multi-Turn Angle Stop – Compression x Compression Use: For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115°F. For those applications, use our KTTM series ball stops.
PAGE 60
Spec Seq#: 41 OCR39 R1 OCR39Z C OCR49 C OCR49 R OCR49Z C 1/2” nom compression x 1/2” OD compression, rough brass, window box 1/2” nom compression x 1/2” OD compression, brass stem, chrome plated 1/2” nom compression x 5/8” OD compression, chrome plated 1/2” nom compression x 5/8” OD compression, rough brass 1/2” nom compression x 5/8” OD compression, brass stem, chrome plated No-Lead Part Listing: OCR09X C 1/2” nom compression x 1/4” OD compression, chrome plated OCR09X C1 1/2” nom compression x 1/4” OD
PAGE 61
Spec Seq#: 41 A OCR19L1 less outlet nut OCR19PX & OCR19PXX PEX tube Insert OCR19L4 less inlet nut PART DIMENSIONS (Inches) DIM A DIM B Model OCR1B 1.02 2.75 OCR3B 1.11 2.75 OCR09 1.02 2.75 OCR19 1.02 2.75 OCR19K 1.02 2.75 OCR19L1 0.74 2.75 OCR19L4 1.02 2.41 OCR19P 1.02 2.41 OCR19PX 1.02 2.41 OCR29 1.18 2.85 OCR39 1.11 2.85 OCR49 1.18 2.97 B Listings & Certifications: IAPMO listed to ASME A112.18.1 / CSA B125.1 (File # 0645) CSA listed to ASME A112.18.1 / CSA B125.
PAGE 62
Spec Seq#: 42 Job Name Engineer / Architect Job Location Wholesaler Submittal Date Contractor 1-**A/ 3-**A Use: Copper Faucet Riser - One-Piece with Insert For use in potable water distribution systems in accessible locations only.
PAGE 63
Spec Seq#: 42 Part Listing (con’t): 1-20A C 1-20A CBT 1-20A CF 1-20A C2 1-20A R 1-20A RBT 1-20A R2 1-20AS C 1-20AS R 3/8” OD tube x 19-1/2” length, chrome plated 3/8” OD tube x 19-1/2” length, chrome plated, plain package, bulk 3/8” OD tube x 19-1/2” length, chrome plated, flag label 3/8” OD tube x 19-1/2” length, chrome plated, 2 pack 3/8” OD tube x 19-1/2” length, rough finish 3/8” OD tube x 19-1/2” length, rough finish, plain package, bulk 3/8” OD tube x 19-1/2” length, rough finish, 2 pack 3/8” OD tub
PAGE 64
Spec Seq#: 42 Part Listing (con’t): 3-20A R 3-20A RBT 3-30A C 3-30A RBT 3-30A C2 3-30A R 3-36A C 3-36A CBT 3-36A C2 3-36A R 3-36C C 1/2” OD tube x 19-1/2” length, rough finish 1/2” OD tube x 19-1/2” length, rough finish, plain package, bulk 1/2” OD tube x 29-1/2” length, chrome plated 1/2” OD tube x 29-1/2” length, rough finish, plain package, bulk 1/2” OD tube x 29-1/2” length, chrome plated, 2 pack 1/2” OD tube x 29-1/2” length, rough finish 1/2” OD tube x 35-1/2” length, chrome plated 1/2” OD tube x 35
PAGE 65
Spec Seq#: 43 06/07/10 15410 Lavatory Mixing Valve - Zurn (ZW3870XLT) Model ZW3870XLT a ® HJC 809210 company Aqua-Gard Thermostatic Mixing Valve APPLICATION Ideal for use where lead free valves are required. The Wilkins Model ZW3870XLT Aqua-Gard Thermostatic mixing valve is designed to be installed at the point of use under sinks and sensor faucets to assist in the prevention of scalding.
PAGE 66
Spec Seq#: 44 Submittal Sheet ADA-compliant undersink protection MAINLINE® EZ Series waste and supply piping covers satisfy ADA compliance requirements. Built-in EZ Grip internal fasteners and internal, EZ Tear-To-Fit trimming feature allow for fast installation without tools. MAINLINE ® cover kits are designed to fit on all tubular and cast brass P-trap assemblies. Valve cover completely encloses angle valve and supply tube for both handled and keyed type water stops.
PAGE 67
Spec Seq#: 45 U-1
PAGE 68
Spec Seq#: 46 BARDONTM 1/8th GPF Features • K-4904-ET 243286 • • • • • • HIGH EFFICIENCY URINAL (HEU) Vitreous china Washout 3/4″ top spud 14″ (356 mm) extended rim 0.125 gpf (0.47 lpf) to 1.0 gpf (3.8 lpf) WaterSense® compliant when used with WaterSense flushometer Will replace K-4960-ET urinal Codes/Standards Applicable Specified model meets or exceeds the following: • • • • ADA ICC/ANSI A117.1 ASME A112.19.2/CSA B45.
PAGE 69
Spec Seq#: 46 BARDONTM 1/8th GPF Technical Information Installation Notes Install this product according to the installation guide. Included components: 3/4″ inlet spud 2″ outlet spud Strainer Hanger (2 required) Refer to manufacturer’s instructions and local codes for flushometer requirements. Will comply with ADA when installed per Section 605 Urinals of the ADA 2010 Standards for Accessible Design.
PAGE 70
Spec Seq#: 47 om n t t Buy Buy Ac t • n C plia • Ac t • plia Description Exposed Urinal Flushometer, for ¾” top spud urinals. Flush Cycle £ Model 186-0.125 (0.125 gpf/0.5 Lpf) £ Model 186-0.25 (0.25 gpf/1.0 Lpf) £ Model 186-0.5 (0.5 gpf/1.9 Lpf) Specifications Quiet, Exposed, Diaphragm Type, Chrome Plated Urinal Flushometer with the following features: • For Flushing Volumes 0.125 and 0.25: Dual Linear Filtered Bypass Diaphragm • For Flushing Volume 0.
PAGE 71
Spec Seq#: 48 Pipe Supports Pipe supports can be used with Sloan Flushometers to help secure the installation. Ideal for use in high vandalism installations, particularly when high rough-in valves have been installed. Pipe supports are designed to accommodate a 1½” diameter tube (when used with a urinal Flushometer Model, install at the top of the Vacuum Breaker Tube).
PAGE 72
Spec Seq#: 49 WC-1
PAGE 73
Spec Seq#: 50 KINGSTONTM Features • • • K-4325 CSA B651 OBC Codes/Standards Applicable Specified model meets or exceeds the following: • • • • • • • ADA ICC/ANSI A117.1 TAS CSA B651 OBC ASME A112.19.2/CSA B45.
PAGE 74
Spec Seq#: 50 KINGSTONTM Technical Information Included component: Spud Top spud, elongated 1.28 gal (4.8 L) or 1.6 gal (6 L)* 1-1/2″ 2-1/8″ (54 mm) 10-1/2″ (267 mm) x 9″ (229 mm) 5-1/4″ (133 mm) 5-1/2″ (140 mm) 35 psi (241.3 kPa) 80 psi (551.6 kPa) 18357 Installation Notes Install this product according to the installation guide. Refer to manufacturer’s instructions and local codes for flushometer requirements. For back-to-back toilet installations: Use only a 45° double wye fitting.
PAGE 75
Spec Seq#: 51 Royal® Model Flushometer u u Description Exposed Water Closet Flushometer, for floor mounted or wall hung top spud bowls. Flush Cycle Model 111-1.28 High Efficiency (1.28 gpf/4.8 Lpf) Specifications Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer for left or right hand supply with the following features: • PERMEX™ Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass • ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle Packing • 1” I.P.S.
PAGE 76
Spec Seq#: 52 Pipe Supports Pipe supports can be used with Sloan Flushometers to help secure the installation. Ideal for use in high vandalism installations, particularly when high rough-in valves have been installed. Pipe supports are designed to accommodate a 1½” diameter tube (when used with a urinal Flushometer Model, install at the top of the Vacuum Breaker Tube).
PAGE 77
Spec Seq#: 53 COMMERCIAL HEAVY-DUTY PLASTIC TOILET SEAT MODEL # COLOR # 1955CT/1955SSCT ______ WHITE Open front less cover, elongated, heavy-duty, injection molded solid plastic toilet seat. Features four molded-in bumpers, non self-sustaining (1955CT) or self-sustaining (1955SSCT) check hinges with non-corrosive 300 Series stainless steel posts and pintles and STA-TITE Commercial Fastening System™. This seat complies with American National Standard Z124.
PAGE 78
Spec Seq#: 54 Z1203-N ® SPECIFICATION SHEET ADJUSTABLE HORIZONTAL SIPHON JET NO-HUB TAG _______ Product Number Z1203-NL4 Z1203-NR4 Approx. Wt. Lbs. [kg] 67 [30] Note: 1. Min. 'P' Dim. Obtainable=2 [51] 2. Feet bolted to floor using min. 1/2 [13] dia. bolts and back slots on carrier feet. 3. Back anchor foot required for secure installation. ENGINEERING SPECIFICATION: ZURN Z1203-N( ) Adjustable, horizontal siphon jet water closet "Rigid System" with 4 [102] No-Hub connections.
PAGE 79
Spec Seq#: 55 WC-2
PAGE 80
Spec Seq#: 56 HIGHLINE® Features • K-4405 ADA CSA B651 OBC 224149 • • • • • • • • ELONGATED TOILET BOWL Vitreous china Elongated bowl With bedpan lugs (-L) 10″ (254 mm) or 12″ (305 mm) rough-in 1-1/2″ top spud 2-1/4″ (57 mm) passageway 11″ (279 mm) x 9″ (229 mm) water area 1.28 gpf (4.8 lpf) or 1.6 gpf (6.
PAGE 81
Spec Seq#: 56 HIGHLINE® Fixture* Configuration Water per flush Spud size Passageway Water area top spud, elongated 1.28 gpf (4.8 lpf) or 1.6 gpf (6.0 lpf)* 1-1/2″ (38 mm) 2-1/4″ (57 mm) 11″ (279 mm) x 9″ (229 mm) 6″ (152 mm) 5-1/2″ (140 mm) 35 psi (241.3 kPa) Water depth from rim Seat post hole centers Minimum static pressure required Maximum static pressure 80 psi (551.6 kPa) Minimum flowing pressure 25 psi (172.4 kPa) required Required supply minimum 25 gal/min (94.6 l/min) * Based upon use of a 1.
PAGE 82
Spec Seq#: 57 Royal® Model Flushometer u u Description Exposed Water Closet Flushometer, for floor mounted or wall hung top spud bowls. Flush Cycle Model 111-1.28 High Efficiency (1.28 gpf/4.8 Lpf) Specifications Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer for left or right hand supply with the following features: • PERMEX™ Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass • ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle Packing • 1” I.P.S.
PAGE 83
Spec Seq#: 58 Pipe Supports Pipe supports can be used with Sloan Flushometers to help secure the installation. Ideal for use in high vandalism installations, particularly when high rough-in valves have been installed. Pipe supports are designed to accommodate a 1½” diameter tube (when used with a urinal Flushometer Model, install at the top of the Vacuum Breaker Tube).
PAGE 84
Spec Seq#: 59 COMMERCIAL HEAVY-DUTY PLASTIC TOILET SEAT MODEL # COLOR # 1955CT/1955SSCT ______ WHITE Open front less cover, elongated, heavy-duty, injection molded solid plastic toilet seat. Features four molded-in bumpers, non self-sustaining (1955CT) or self-sustaining (1955SSCT) check hinges with non-corrosive 300 Series stainless steel posts and pintles and STA-TITE Commercial Fastening System™. This seat complies with American National Standard Z124.
PAGE 85
Spec Seq#: 60 WC-3
PAGE 86
Spec Seq#: 61 WELLWORTH® Features • K-4406 237059 • • • • • • • • ELONGATED TOILET BOWL Vitreous china Elongated bowl With bedpan lugs (-L) 10″ (254 mm) or 12″ (305 mm) rough-in 1-1/2″ top spud 2-1/4″ (57 mm) passageway 11″ (279 mm) x 9″ (229 mm) water area 1.28 gpf (4.8 lpf) or 1.6 gpf (6.0 lpf) depending on flushometer specified 28-1/4″ (718 mm) x 14-7/8″ (378 mm) x 15″ (381 mm) Codes/Standards Applicable Specified model meets or exceeds the following: • ASME A112.19.2/CSA B45.
PAGE 87
Spec Seq#: 61 WELLWORTH® Fixture: Configuration Water per flush Spud size Passageway Water area top spud, elongated 1.28 gpf (4.8 lpf) or 1.6 gpf (6.0 lpf)* 1-1/2″ (38 mm) 2-1/4″ (57 mm) 11″ (279 mm) x 9″ (229 mm) 6″ (152 mm) 5-1/2″ (140 mm) 35 psi (241.3 kPa) Water depth from rim Seat post hole centers Minimum static pressure required Maximum static pressure 80 psi (551.6 kPa) Minimum flowing pressure 25 psi (172.4 kPa) required Required supply minimum 25 gal/min (94.6 l/min) * Based upon use of a 1.
PAGE 88
Spec Seq#: 62 Royal® Model Flushometer u u Description Exposed Water Closet Flushometer, for floor mounted or wall hung top spud bowls. Flush Cycle Model 111-1.28 High Efficiency (1.28 gpf/4.8 Lpf) Specifications Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer for left or right hand supply with the following features: • PERMEX™ Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass • ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle Packing • 1” I.P.S.
PAGE 89
Spec Seq#: 63 COMMERCIAL HEAVY-DUTY PLASTIC TOILET SEAT MODEL # COLOR # 1955CT/1955SSCT ______ WHITE Open front less cover, elongated, heavy-duty, injection molded solid plastic toilet seat. Features four molded-in bumpers, non self-sustaining (1955CT) or self-sustaining (1955SSCT) check hinges with non-corrosive 300 Series stainless steel posts and pintles and STA-TITE Commercial Fastening System™. This seat complies with American National Standard Z124.
PAGE 90
Spec Seq#: 64 WF-1
PAGE 91
Spec Seq#: 65 MF2944 Terreon® Quadra-Fount® Washfountains cUPC Certified Serves One to Four Users at a Time Unique, Repairable, Solid Surface Material Highly Vandal Resistant Saves Water, Energy and Space ADA Compliant Available with Air Metering, TouchTime®, Infrared or Battery Infrared Control Specifications Size and Capacity Accommodates 1–4 users at a time, using less water, energy and space than four lavs with conventional faucets.
PAGE 92
Spec Seq#: 65 MF2944 Terreon® Quadra-Fount® Washfountains Standard Selections (Must select one from each category) ¨ JUV 17" (435) Juvenile Height Top View Valves (select one) ¨ AST Air Metering ¨ IR Adaptive Infrared ¨ BIR3 Battery Infrared ¨ TT TouchTime® Metering Soap Dispenser (select one) ¨ LSD Liquid Soap Dispenser ¨ NSD Color of Terreon Bowl (select one) Standard Colors Empire Gray E-GRAY Peppered White PEP-WHT Sandtrap SAND Charcoal Gray CHAR* Jade JADE* GRA
PAGE 93
Spec Seq#: 65 MF2944 Terreon® Quadra-Fount® Washfountains Rough-Ins (mm) 11" (279) For Units with TouchTime and Infrared Activation, 110V GFI Electrical Outlet Recommended Location (Refer To Local Codes Before Rough-In) Mounting Panels (2) Appropriate Anchors and 3/8" Bolts (Supplied By Installer) To Mount Bowl To Wall 7" (178) 1-1/2" NPT Waste Connection For Use With 1-1/2" Tubular P-Trap, Stub Out Min. 1-1/2" 28" * (711) 1/2" Nominal Copper Tubing For Supplies, Stub Out Min.
PAGE 94
Spec Seq#: 66 SP-1
PAGE 95
Spec Seq#: 67 SECTION: 2.60.090 Your Peace of Mind is Our Top Priority ® FM2193 0513 Supersedes 1012 ® MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347 SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961 (502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624 THE ZOELLER APPLICATIONS: Guard ® visit our web site: www.zoeller.com SYSTEM 324562 Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies.
PAGE 96
Spec Seq#: 67 MODEL 57 152 153 161 Feet Meters 5 1.5 10 3.0 15 4.6 20 6.1 25 7.6 30 9.1 35 10.7 40 12.2 50 15.2 Shut-off Head: Gal. Liters 43 163 34 129 19 72 ------------19.25 ft (5.9 m) Gal. Liters 69 261 61 231 53 201 44 167 34 129 23 87 ------38 ft (11.6 m) Gal. Liters 77 291 70 265 61 231 52 197 42 159 33 125 22 83 11 42 --44 ft (13.4 m) Gal.
PAGE 97
Spec Seq#: 68 MS-1
PAGE 98
Spec Seq#: 69 ® Z1996-24 MOP SERVICE BASIN 24 x 24 [610 x 610] TAG _______ 26971 Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Product Mop Basin Size Approx. Wt. Lbs. [kg] __ Z1996-24 24 x 24 x 10 [610 x 610 x 254] 50 [23] ENGINEERING SPECIFICATION: Z1996-24 Mop Service Basin 24 x 24 x 10 [610 x 610 x 254] Molded high density composite basin, PVC drain body, stainless steel strainer and 3 [76] gasketed outlet connection.
PAGE 99
Spec Seq#: 70 ______________________________________________________ SINK FAUCET Z843M1 Engineering Specifications: Zurn AquaSpec® Z843M1 Polished chrome-plated cast brass 8" [203mm] sink faucet with quarter turn ceramic disc cartridges, 3/8" [10mm] short swivel inlets providing adjustable centers from 7-1/4" [184mm] to 8-3/4" [222mm], integral service stops and a 6" [152mm] centerline cast brass spout with chemical resistant atmospheric vacuum breaker, 3/4" hose threaded outlet, pail hook and adjustable
PAGE 100
Spec Seq#: 73 MV-1
PAGE 101
Spec Seq#: 74 Submittal Data Sheet S-841-LF February 2013 THERMOSTATIC MIXING VALVE MODEL 170-LF ECO-MIX ™ MODEL 3/8" inlets, 3/8" outlet, compression connections MATERIALS: TEMPERATURE ADJUSTMENT CAP Lead Free Bronze body LOCK SCREW INTEGRAL CHECK VALVES LF HOT INLET H COLD INLET C Locked temperature adjustment cap (vandal resistant) Copper encapsulated thermostat assembly with polymer thermoplastic shuttle Stainless steel springs Buna-N O-rings Integral I t l check h k valves l on
PAGE 102
Spec Seq#: 74 5" LF H 350320 BP OPTION BP-OPTION LF C H C 2" 281" 4" BRKT-OPTION APPLICATION The Model 170-LF is a high performance Temperature Actuated Mixing Valve used to supply single outlets. Can be used to supply one sensor faucet or one two handle manual faucet. MIXED MIXED COLD C H HOT HOT Two Handle Faucet COLD Sensor Faucet 170-LF-BP 170-LF Note: Leonard Valve Company reserves the right of product, or design modifications without notice or obligation.
PAGE 103
Spec Seq#: 75 S-1
PAGE 104
Spec Seq#: 76 Hand Wash-Up Sink Type 304 Models CHS1716C and CHS1716 SPECIFICATIONS GENERAL CHS1716C Type 304 (18-8) stainless steel hand wash-up sink. Basin has 1-3/4" (45mm) radius coved corners. Full length 7" (178mm) high backsplash. Exposed surfaces have a brushed finish. Furnished with a wall hanger and integral stainless steel support brackets. Carries NSF International Certification. 16850 FURNISHED COMPLETE WITH: SUPPLY: LK940GN04L2H Chrome plated gooseneck spout faucet with AE13A aerator.
PAGE 105
Spec Seq#: 76 Hand Wash-Up Sink Type 304 Models CHS1716C and CHS1716 SPECIFICATIONS HOLE DRILLING CONFIGURATIONS 7" (178mm) 8-3/8" (213mm) 16850 8-3/8" (213mm) 1-1/4" (32mm) DIA. 1 HOLE 4" (102mm) CHS17161 4-3/8" (111mm) 4-3/8" (111mm) 8" (203mm) 7" (178mm) 4" (102mm) 1-1/4" (32mm) DIA. 2 HOLES CHS17162 Elkay 4-1H 2222 Camden Court Oak Brook, IL 60523 (Rev. 11/09) Printed in U.S.A.
PAGE 106
Spec Seq#: 77 S-2
PAGE 107
Spec Seq#: 78 SERIES SCULLERY SINKS SERIES 3-Compartments • L&R Drainboards specifications C LIFETIME GUARANTEE D A A A C R3/4" B E Ø3 1/2" Ø1 1/8" 8" ROUGH-IN SECTION 2" 1 1/2" 9" 2" 14" 22" B/2 + 2 1/2" FAUCET 38" SCREW HOLES 42 1/2" MATERIAL y C60 Series 16 gauge, type 304 stainless y C75 Series 14 gauge, type 304 stainless -Sink bowl(s) -Drainboard(s)1 -Backsplash y Type 304 stainless steel -Basket drains -Apron front2 -Leg sockets -Sink legs & feet MECHANICAL y Backsplash is
PAGE 108
SPECIFICATIONS FEATURES Models Model LK940DS20L2H • Two hole dual handle wall mount faucet • Quarter turn ceramic disc cartridge • 1/2" adjustable inlets • Solid brass construction • Chrome finish • 2.2 GPM VR aerator with 1.5 and .
PAGE 109
REPLACEMENT PARTS Wall Mount 8" Center Commercial Faucet Models LK940DS20L2H, LK940DS20T4H, LK940DS20T6H 7 ITEM 1 IND. PART A55411 DESCRIPTION Spout 2 2 45918C 45919C Handle, 2" Handle, 4" 2 3 45920C 45923C Handle, 6" Right Cold Cartridge 4 5 6 45924C A55413 45912C Left Hot Cartridge 1/2" Adjustable Inlet Body 7 8 LK734 98555C 2.2 GPM VR Aerator V.B. Repair Kit 1 2 2 4 3 5 5 6 Elkay elkayusa.
PAGE 110
Spec Seq#: 80 Part No. McGuire Manufacturing Co., Inc. 60 Grandview Court P.O. Box 746 • Cheshire, CT 06410 203-699-1801 • Fax: 203-699-1813 www.mcguiremfg.com 151A Stainless Steel Basket Strainer PRODUCT SPECIFICATION Submittal Number: 4-3/8" Rubber Washer Stainless Shell 2-3/4" Lock Nut Washer Slip Nut 1-1/2" O.D. 4" 1-1/2" See options and accessories section for details on product variations.
PAGE 111
Spec Seq#: 81 Continuous Waste Drain Connection for a 3 Compartment Sink with Center Outlet Model LK60 ® SPECIFICATIONS 47865 GENERAL LK60 Satin chrome plated brass 1-1/2" (38mm) O.D. continuous waste for a three compartment sink with center outlet. 30" (762mm) center to center outlet. Brass coupling nuts and 1-1/2" (38mm) O.D. x 4" (102mm) chrome plated brass tailpiece. Ship. Wt. 5 lbs. Model LK60 72000524 PLASTIC WASHER (5-REQ’D) 72001653 COUPLING NUT BRASS (5-REQ’D) 72001507 WASTE ARM C.P.
PAGE 112
111729 Spec Seq#: 82
PAGE 113
Spec Seq#: 83 S-3
PAGE 114
Spec Seq#: 84 Gourmet Single Bowl Sinks Models PSR and PSRQ Series, and PSRADQ – A.D.A. Compliant Series ® SPECIFICATIONS GENERAL Fine quality sink formed of #20 gauge, type 304 (18-8) nickel bearing stainless steel. Top mount. DESIGN FEATURES Bowl Depth: 7-1/4" ( 1 8 4 m m ) (PSRS(Q)3322), 7-1/2" (191mm) (PSR(Q)2521 and PSR(Q)2522), 5-1/2" (140mm)(PSRADQ1919), 7-1/8" (181mm) (all others). Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
PAGE 115
Spec Seq#: 84 Gourmet Single Bowl Sinks Models PSR and PSRQ Series, and PSRADQ – A.D.A. Compliant Series ® SPECIFICATIONS HOLE DRILLING CONFIGURATIONS 4" 4" 4 4" 4" 2 4" 4" 56870 1 OS4 4" 4" MR2 4" 4" 4" 4" 4" 5 4" 3 DRAIN OPENING LOCATIONS 5 (127mm) 5 (127mm) Off-Centered Left PSRADQ191955L Model Only 5 (127mm) 5 (127mm) Off-Centered Right PSRADQ191955R Model Only U-Channel Type Mounting System Quick-Clip Mounting System ® Elkay 1-187D (Rev.
PAGE 116
Spec Seq#: 85 Cast Deckmount Sink Faucets 8” Centers Specification: (example) • • • • HEAVY DUTY CAST BRASS sink faucet 203mm (8'') center two handle Polished chrome plated finish BRASS swing spout or 3/8” IPS BRASS PIPE Rigid/Swivel Gooseneck Spout • Metal hold-down package • Color indexed metal handles with vandal resistant screws and … with … (add CER-TECK® 1/4 turn ceramic structures or TUF-TECK® compression structures) with … (add spout required) with … (add outlet required) with … (add handle requir
PAGE 117
Spec Seq#: 85 Cast Deckmount Sink Faucets 8” Centers Approvals: 135mm (5.3") FRONT VIEW 5 • Complies to ASME A112.18.1 • Lever Blade Handles No. 2, 3, 4, and 5, ADA Compliant and meet Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. 1 152mm (6.0") 87mm (3.4") 96mm (3.77") 2 141mm (5.5") 102mm (4.0") 97mm (3.8") • IAPMO listed 76mm (3.0") 332331 • CSA certified 3 (Contact Delta Representative for State and/or Local Approvals.) 76mm (3.
PAGE 118
Spec Seq#: 86 Part No. McGuire Manufacturing Co., Inc. 60 Grandview Court P.O. Box 746 • Cheshire, CT 06410 203-699-1801 • Fax: 203-699-1813 www.mcguiremfg.com 151AECO Stainless Steel Basket Strainer PRODUCT SPECIFICATION Submittal Number: 198713 Job Name: 4-3/8" Rubber Washer Stainless Shell 2-7/8" Lock Nut Flanged Polypropylene Washer Slip Nut Specifications: Heavy Duty Forged Stainless Steel Basket Strainer with metal stem, lock and coupling nuts. © 2011 McGuire Manufacturing Co., Inc.
PAGE 119
PLASTIC TUBULAR 1-½” P-TRAP WITH THREADED ADAPTER Engineering Specification: Dearborn Brass Plastic Tubular 1-½” P-Traps with Threaded Adapter are designed for use in tubular drain applications. Options include PVC or ABS plastic adapter and True Blue Premium Washers for superior sealing. Available in white or black polypropylene plastic.
PAGE 120
Spec Seq#: 88 Engineer / Architect Job Location Wholesaler Submittal Date Contractor OCR1B/ OCR3B & OCR09/ OCR19/ OCR39/ OCR49 Multi-Turn Angle Stop – Compression x Compression Use: For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115°F. For those applications, use our KTTM series ball stops.
PAGE 121
Spec Seq#: 88 OCR39 R1 OCR39Z C OCR49 C OCR49 R OCR49Z C 1/2” nom compression x 1/2” OD compression, rough brass, window box 1/2” nom compression x 1/2” OD compression, brass stem, chrome plated 1/2” nom compression x 5/8” OD compression, chrome plated 1/2” nom compression x 5/8” OD compression, rough brass 1/2” nom compression x 5/8” OD compression, brass stem, chrome plated No-Lead Part Listing: OCR09X C 1/2” nom compression x 1/4” OD compression, chrome plated OCR09X C1 1/2” nom compression x 1/4” OD
PAGE 122
Spec Seq#: 88 A OCR19L1 less outlet nut OCR19PX & OCR19PXX PEX tube Insert OCR19L4 less inlet nut PART DIMENSIONS (Inches) DIM A DIM B Model OCR1B 1.02 2.75 OCR3B 1.11 2.75 OCR09 1.02 2.75 OCR19 1.02 2.75 OCR19K 1.02 2.75 OCR19L1 0.74 2.75 OCR19L4 1.02 2.41 OCR19P 1.02 2.41 OCR19PX 1.02 2.41 OCR29 1.18 2.85 OCR39 1.11 2.85 OCR49 1.18 2.97 B Listings & Certifications: IAPMO listed to ASME A112.18.1 / CSA B125.1 (File # 0645) CSA listed to ASME A112.18.1 / CSA B125.
PAGE 123
Spec Seq#: 89 Job Name Engineer / Architect Job Location Wholesaler Submittal Date Contractor 1-**A/ 3-**A Use: Copper Faucet Riser - One-Piece with Insert For use in potable water distribution systems in accessible locations only.
PAGE 124
Spec Seq#: 89 Part Listing (con’t): 1-20A C 1-20A CBT 1-20A CF 1-20A C2 1-20A R 1-20A RBT 1-20A R2 1-20AS C 1-20AS R 3/8” OD tube x 19-1/2” length, chrome plated 3/8” OD tube x 19-1/2” length, chrome plated, plain package, bulk 3/8” OD tube x 19-1/2” length, chrome plated, flag label 3/8” OD tube x 19-1/2” length, chrome plated, 2 pack 3/8” OD tube x 19-1/2” length, rough finish 3/8” OD tube x 19-1/2” length, rough finish, plain package, bulk 3/8” OD tube x 19-1/2” length, rough finish, 2 pack 3/8” OD tub
PAGE 125
Spec Seq#: 89 Part Listing (con’t): 3-20A R 3-20A RBT 3-30A C 3-30A RBT 3-30A C2 3-30A R 3-36A C 3-36A CBT 3-36A C2 3-36A R 3-36C C 1/2” OD tube x 19-1/2” length, rough finish 1/2” OD tube x 19-1/2” length, rough finish, plain package, bulk 1/2” OD tube x 29-1/2” length, chrome plated 1/2” OD tube x 29-1/2” length, rough finish, plain package, bulk 1/2” OD tube x 29-1/2” length, chrome plated, 2 pack 1/2” OD tube x 29-1/2” length, rough finish 1/2” OD tube x 35-1/2” length, chrome plated 1/2” OD tube x 35
PAGE 126
Spec Seq#: 90 FCO
PAGE 127
Spec Seq#: 91 SPECIFICATION SHEET Z1400 ® TAG _______ HEAVY-DUTY "LEVEL-TROL" ADJUSTABLE FLOOR CLEANOUT 27857 Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice ENGINEERING SPECIFICATION: ZURN Z1400 "Level-Trol" Adjustable floor cleanout, Dura-Coated cast iron body with gas and watertight ABS tapered thread plug and round scoriated cast iron heavy-duty secured top (Specify finish Z, ZB, ZN, ZS) adjustable to finished floor.
PAGE 128
Spec Seq#: 92 COTG
PAGE 129
Spec Seq#: 93 SPECIFICATION SHEET Z1400 ® TAG _______ HEAVY-DUTY "LEVEL-TROL" ADJUSTABLE FLOOR CLEANOUT 27857 Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice ENGINEERING SPECIFICATION: ZURN Z1400 "Level-Trol" Adjustable floor cleanout, Dura-Coated cast iron body with gas and watertight ABS tapered thread plug and round scoriated cast iron heavy-duty secured top (Specify finish Z, ZB, ZN, ZS) adjustable to finished floor.